RadioLink T8FB(BT)


Easy to Use, Certainly Worth Its Value

Best Choice for Beginners



Compatible with R16F, R16SM, R12F, R8EF, R8FM, R8SM, R8XM, R8FGH, R8FG, R7FG, R6FG, R6F, R4FGM

Wide Operating

Voltage Tolerance

Mini Receiver

APP Param. Setup

Battery Polarity Control

Operating Current

of 80mA

8CH Complete Functions

FHSS& 67 Channels Pseudo-Random

Frequency Hopping    

SBUS/PPM/PWM

2000 Meters Control Distance


T8FB(BT), with the same FHSS algorithm of AT9S Pro and 67 channels pseudo-random frequency sequence hopping,

the chip TI CC2500(same as the Open TX Frsky X9D) and the transmission rate (which three times faster than Open TX),

achieving the better anti-interference ability to both the same frequency band and different frequency bands.

The control distance of T8FB is 2000 meters(1.24Miles) in air.

0.25us Gimbal Precision


The optimal design of the PCB layout ensures maximum PWM jitter of 1.84us with a standard of just 0.25us. It is 14 times better than regular jitter 7us of the mainstream 8-channel transmitter in the market. The same joystick components as AT9S Pro.

max PWM signal jitter is 1.84us, the regular jitter is 0.25us

USB Upgrade

APP Parameter Setup


Parameters can be easily set up and modified with an Android or iOS mobile phone APP connected via Bluetooth.

Parameters can also be set up by computer tools connected via a USB cable.

USB upgrades with new functions added, and keeps T8FB(BT) always advanced.

Countless sets of model data can be stored.

* T8FB(BT) firmware upgrade software is compatible with win7, win8, win10, and XP OS.

* Parameter setup APP supports both Android and iOS.

* The App displayed language will automatically be set to the mobile.

① Parameters setup by Android or iOS mobilephone APP

② Parameters setup by computer APP

Real-time Built-in Telemetry


Real-time model data feedback function allows users to receive the transmitter voltage and RSSI information.

When paired with receiver R16F, R8FGH, R8FG, or R7FG, the model voltage will display on the mobile phone APP.

Output RSSI Value From Receiver To FPV Monitor

Real-time RSSI Telemetry When Racing

Programmable Mix Control


Channels five through eight can be programmed to any advanced setting

Flight modes are set with the two 3-way switches in the flight controller PIX by default.

Even beginners can enjoy T8FB without a manual.

Adapts to Multiple Models


Adaptable models include Fixed Wing, Glider, Multicopter, Car, Boat, and Robot.

The transmitter automatically switches layout depending on the selected mode.

The receiver with a 21cm (8.27”) antenna is also perfect for easy RC boat control.

Compatible with Multiple Receivers

SBUS/PPM/PWM Supported


Standard receiver R8EF supports SBUS, PPM, and PWM signals output, no need for extra cables or any signal converter, reducing the weight of the aircraft.

When outputting the SBUS and PPM signals, channels 3 to 8 can also output corresponding PWM signals at the same time and work with the T8FB turn switch to control PTZ and landing gear. With the T8FB in hand to have all functions, R/C fans can fully enjoy with fun!

Anti-polarity Connect Protection


The voltage protection software technology of RadioLink ensures both the transmitter and receiver are protected from a reverse polarity connection.

*Battery Case Dimensions: 115(L)*35.5(W)*24(H)mm (4.53"*1.4"*0.94")

Low Consumption of Battery


Switching Mode Power Supply(SMPS) keeps the operating current of T8FB less than 80mA.

With a 3S 1800mAh LiPo battery in T8FB(BT), the RC fun lasts more than 20 hours.

Wide Operating Voltage Tolerance


Wide Operating Voltage Tolerance：4.8V~18V

Universal JST connector allows T8FB(BT) easily adapted for various battery layouts: 4pcs AA batteries or a 2S-4S LiPo or 18650 Lithium battery.

Pay attention: if you use a 18650 Lithium to power T8FB, please make sure the 18650 Lithium has a JST connector and the dimension of the battery case is 115(L)*35.5(W)*24(H)mm (4.53"*1.4"*0.94")

Antenna

Two-way switch(SWA)

Knob switch(VrA)

Aileron Phase Switch

Elevator Phase Switch

LED Indicator

Elevator/Rudder Gimbal Stick

Elevator Trim

Rudder Trim

Hook

Holder

LED Indicator

Aileron/Throttle Gimbal Stick

Power Switch

Throttle Trim

Aileron Trim

Rudder Phase Switch

Throttle Phase Switch

Three-way switch(SWB)

Knob switch(VrB)

Mode 1

Inherits Industrial Design


Designed by the same professional company as AT9S Pro, T8FB(BT) is the perfect choice for RC fun with innovation and an independent design concept.

* All data of T8FB are tested in a closed environment in favorable conditions with an unobstructed wireless signal. Actual results may vary depending on the environment, usage, and firmware version.

* While using T8FB, if you have some questions about it, you can view the instructions, tutorials, or FAQ to get the answers.

* After viewing all the tutorials, you can consult us via after_service@radiolink.com.cn if you still have questions about the operation.

  • Transmitter*1

  • Receiver*1

  • Hook and Spring*1

  • User Manual*1

  • Packing Box*1

T8FB(BT) Packing List


(For the actual packing list, please refer to the sales page of the T8FB(BT) that you purchased,

or confirm it with the shop sales first.)

More Accessories * Choose What You Need

More RadioLink Transmitters